Cleaning And Maintenance - Titan PR 33 Notice D'instructions

7.3. Cleaning and maintenance:

Dirt and abrasion impair the function of the units.
Therefore, all units should be air-cleaned with compressed air in the area of the
strap guidance, notching cutters, tensioning wheel and joints after being used und,
following that, be wetted with resin-free thin spray oil.
Tool inspection!
Perform a daily visual inspection of the outside of the unit. The early
detection of damaged parts extends the life of the unit. Replace all damaged
parts immediately with Original TITAN spare parts.
PR33/SPZ/HR32/HHA
32 / 66
H363 38/10