3.
Safety regulations
Intended use
Those units are intended for the strapping of packages, loads on pallets etc.
The units were developed and constructed for safe operation during strapping.
The units are intended for strapping with steel packaging straps.
Possible misuse
Those units do not permit strapping with plastic strap.
Strapping material must not be used for the hoisting of loads, this strapping tool may only
be used as intended and specified above.
Standards applied and technical specifications:
(see EU declaration of conformity)
Warranty and liability
TITAN GmbH & Co. KG grants a guarantee of six (6) months for all strapping units sold
by it. Such guarantee covers all defects of which evidence can be given that they result
from faulty manufacture or material defects.
Wearing parts are excluded from the warranty.
Warranty and liability claims shall be excluded if they are due to one or more of the following
causes:
Misuse of the tool.
Incorrect assembly, commissioning, operation and maintenance of the tool.
Operation of the tool with improper safety and protective devices.
Failure to comply with the information in the operating manual.
Unauthorized structural modifications to the tool.
Insufficient monitoring of tool parts that are subject to wear.
Improper repairs.
The manufacturer reserves the right to make changes to the scope of delivery at any
time for the purpose of improving the product.
PR33/SPZ/HR32/HHA
H363 EU 17/11
22 / 66