Safety Instructions - Titan HKE-L Notice D'instructions

3.

Safety instructions

Failure to comply with the following safety instructions, in addition to errors in
handling the device, can result in serious injuries.
Be informed!
Read
carefully
device.
Protect yourself!
Always wear eye, face and hand
protection (cut-resistance
gloves) when working.
Attention: Strap can break!
The strap can break during
tightening! Do not stand in the
path of the strap. Make sure that
no one else is in the working
area.
Use only original TITAN
replacement parts!
The use of other than original
TITAN replacement parts will
void the warranty and all liability.
The use of straps other than
recommended
broken
tightening
insufficient strapping. Use only
corresponding
products from TITAN!
Workplace!
Always maintain an orderly
workplace. A disorderly
workplace can cause accidents.
When operating the crimper,
make sure that you‟re in a well-
braced position in order to
maintain optimum balance and
prevent the risk of falling. Never
operate the tool in an awkward
working position!
HKE-L
the operating manual
before using the
can result
straps during the
process and
quality
H 223 EU 33/10
Caution: Danger of crushing!
Do not insert fingers into the
pulley area.
Caution:
Strap
packed!
Make sure that no hands or
other body parts are between
the strap and the goods to be
packaged.
Attention: Strap flies outward!
When cutting the strap, hold the
top part firmly and stand to the
side.
Attention: The lower part of the
strap will fly outward.
This tool may be operated only
in by personnel who have been
trained
consult your TITAN packaging
consultant if you have any
questions about this.
Maintenance!
In order to operate safely, the
tool must be properly
maintained. Check the condition
of your tool regularly for defects
or worn parts. Never use a tool
that has defects or worn parts.
Modifications to the tool are
strictly prohibited. Failure to
comply with this regulation can
result in serious injury.
only objects to be
accordingly. Please
19 / 47