Controller Specifications; Controller Outline - Varian Turbo-V 81-AG Rack Controller Notice De Mode D'emploi

CONTROLLER SPECIFICATIONS

Input:
Voltage
Frequency
Power
Fuse
Output:
Voltage
Frequency
Power
Environment storage
Operating
The Controller must be positioned in such way that the
mains cable can be easily disconnected.
100, 240 Vac
50 to 60 Hz
210 VA
2 x T4 A (slow blow) 250 V
76 Vac
1350 Hz
100 W
-20 °C to +70 °C
0-95%
+5 - +45 °C
0 – 90%
NOTE
244.0 [9.61]
Applied norr.
Weight:
Pollution Degree
Installation Category

CONTROLLER OUTLINE

The outline dimensions for the Turbo-V 81-AG Rack
controllers are shown in the following figure.
The Turbo-V controller can be used as a bench unit or
as a rack module, but it must be positioned so that free
air can flow through the holes.
9.4 [0.37]
1.5 [0.06]
Controller Outline
70
TECHNICAL INFORMATION
EN 61010 -1
EN 55011 (Class-A)
EN 61000-3-2,
EN 61000-3-3,
EN 61000-6-2,
EN 61000-4-2,3,4,5,6,11,8
1.7 Kg (3.2 lbs)
2
II
NOTE
106.4 [4.19]
91.4 [3.60]
=
LS
AG
VACUUM TECHNOLOGIES
COUNTERS
increase
menu
decrease
LOW SPEED
Turbo-V 81-AG
Dimensions: mm [inches]
87-900-986-01 (C)
=
R1
R2
MEASURES
next
previous
START/STOP