Operating The Cooling Device Safely - Dometic CoolFreeze CFX Série Notice D'utilisation

CFX28 – CFX65DZ
• Never pull the plug out of the socket by the cable.
• If the cooling device is connected to the DC outlet: Disconnect the
cooling device and other power consuming devices from the battery
before connecting a quick charging device.
• If the cooling device is connected to the DC outlet: Disconnect the
cooling device or switch it off when you turn off the engine. Otherwise
you may discharge the battery.
• The cooling device is not suitable for transporting caustic materials or
materials containing solvents.
• The insulation of the cooling device contains flammable cyclopentane
and requires special disposal procedures. Deliver the cooling device
at the end of its life-cycle to an appropriate recycling.
2.2

Operating the cooling device safely

!
CAUTION!
• Before starting the cooling device, ensure that the power supply line
and the plug are dry.
A
NOTICE!
• Do not use electrical devices inside the cooling device unless they are
recommended by the manufacturer for the purpose.
• Do not place the cooling device near naked flames or other heat
sources (heaters, direct sunlight, gas ovens etc.).
• Danger of overheating!
Ensure at all times that there is sufficient ventilation so that the heat that
arises during operation does not build up. Make sure that the cooling
device is sufficiently far away from walls and other objects so that the
air can circulate.
• Ensure that the ventilation openings are not covered.
• Do not fill the inner container with ice or fluid.
• Never immerse the cooling device in water.
• Protect the cooling device and the cable against heat and moisture.
EN
Safety instructions
9