Commissioning - Festool TSC 55 REB Guide D'utilisation

fered by Festool, the machines can also be used for
sawing aluminium.
Only saw blades with the following specifications
may be used: Saw blade diameter 160 mm, cutting
width 2,2 mm, location hole 20 mm, max. standard
blade thickness 1,8 mm, suitable for speeds up to
-1
9500 min . Never use abrasive wheels in the ma-
chine.
Do not use with battery packs BP 18 Li 2.6 C Ah and
BP 18 Li 3.1 C Ah.
Changing the battery pack
Removing the battery pack [2 A]
2 A
Removing battery pack
1
2
2
Inserting the battery pack [2 B]
2 B
Inserting battery pack
klick
klick
12
1
The machine is designed and approved for use by
trained persons or specialists only.
The user bears the responsibility for damage and
accidents caused by improper use; this also in-
cludes damage and wear caused by continuous
use in industry.

Commissioning

 Please note! Machine operation is only possible
under the following conditions [2 C]:
2 C
Both battery packs are used. Maximum
power with two battery packs (36 V).
Only the lower battery pack is used. Less
power with one battery pack (14.4 V/18 V).
WARNING