INFOSEC UPS SYSTEM E4 LCD Evolution 10K TM Manuel Utilisateur page 98

BATTERY
Battery type
Number
Standard
model Recharging time
Charging current (max.)
Charging voltage (max.)
Battery type
Number
Long-run
model (S)
Charging current (max.)
Charging voltage (max.)
DISPLAY
LCD screen
PHYSICAL CHARACTERISTICS
Dimensions HxWxD (mm)
Standard
model
Net weight (kg)
Dimensions HxWxD (mm)
Long-run
model (S)
Net weight (kg)
ENVIRONMENT
Humidity
Noise level
MANAGEMENT
RS232 & USB communication ports
Optional SNMP
Dry contacts
Software
NORMS
Standard
EMC
Low voltage (safety)
WARRANTY
Warranty
* Derate capacity to 60% of capacity in CVCF mode and to 90% when the output voltage is adjusted to 208VAC.
**If the UPS is installed or used in a place where the altitude is above 1,000m, the output power must be derated one percent
per 100m.
***Product specifications are subject to change without further notice.
INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
97
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 06 14 AA 59 203 46
20
(18-20 adjustable) (18-20 adjustable)
1.0 A ± 10% 2.0 A ± 10%
Depending on the capacity of external batteries
4.0 A ± 10% 8.0 A ± 10%
UPS status, load level, battery level, Input/Output voltage,
discharge timer and fault conditions
576 X 250 X 592
83
576 X 250 X 592
28
20-90 % RH @ 0- 40°C (non condensing)
<58dB at 1 Meter
Supports Windows family, Novell, Linux, Mac and FreeBSD
Power management from SNMP manager and web browser
Dry contacts communication card for remote alarm
EN62040-1-1/2003,2006/95/EC
12 V / 9 AH
2 x 20 2 x 20
(18-20 adjustable)
9 hours to 90% capacity
2.0 A ± 10%
273 VDC ± 1%
18 – 20
8.0 A ± 10%
273 VDC ± 1%
826 X 250 X 815
164
576 X 250 X 592
40
<60dB at 1 Meter
InfoPower
EC
EN62040-2/2006
2 years
3 x 20
(18-20 adjustable)
4.0 A ± 10%
12.0 A ± 10%
1000 X 300 X 815
234
826 X 250 X 815
64
<65dB at 1 Meter