Cleaning - Swiss Made Xplorer Traduction De La Notice Originale

Possible damage to the clipper!
Insufficient oiling of the clipping head will lead to warming and will shorten the life of the
clippers and its blades.
► Oil the clipping blades adequately during the clipping session, at least once every 15
minutes, so that they do not run dry.
► Only use the special oil supplied or a paraffin oil conforming to the ISO VG 15 specifi-
cation.
► The supplied oil is free of poisonous substances and will not cause irritations on either
skin or mucous membranes. After 21 days, it will have degraded to about 20% (CEL-
L-33-T-82).
• Oil the blades prior to, during and after every use.
• Oil the blades at the latest when the blades leave streaks or slow down.
• Apply several drops of oil on the front and on the sides of the clipping blades (see Fig.
15).
• Immediately replace damaged or notched blades in order to avoid injuries.
7.10

Cleaning

Housing of the clipper
Clean the housing of the clipper with a dry cloth.
‹
Clipping blade, clipping head and charger
Disconnect the charger from the power supply.
‹
Use the brush supplied to clean the clipping blades, clipping head and charger.
‹
Lubricate the clipping blades as described in chapter 6.9.
‹
Remove any hair from the charging bay.
‹
Clean the terminals with a dry cloth if necessary.
‹
40
NOTICE
NOTE
Cattle and Horse Clippers