Charging Status Display - Swiss Made Xplorer Traduction De La Notice Originale

Tondeuse à chevaux et à bétail
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 46

7.4 Charging status display

Normal charging
The three LEDs light up red if the battery is discharged. The green light indicates that the
battery is charged. The charging process is displayed differently depending on the residu-
al voltage:
36
The LEDs are shown as follows in these operating instruc-
tions:
1
LED switched off
2
LED lights up red
3
LED lights up green
Four charging statuses are displayed with the LEDs:
AC adapter connected
The continuous green light on the lower LED signals that
the AC adapter is correctly plugged into the power socket.
The charger is supplied with power and is ready to ope-
rate.
Discharged battery, 0 % battery charge
approx. 30 % battery charge
approx. 75 % battery charge
approx. 90 % battery charge
Deep discharging
_
With a deeply-discharged battery, the LEDs flash red and
_
green alternately. The charger attempts to charge the bat-
tery. If the voltage does not increase after a short while, the
display shows "Battery defective". If it is successful, normal
charging starts.
Cattle and Horse Clippers

Publicité

Table des Matières
loading

Table des Matières