Cleaning The Floor Nozzle; Cleaning The Brush Roller - Bosch BBH7 Série Mode D'emploi

Cleaning the floor nozzle
23
a
2
b
c
1
34

Cleaning the brush roller

Before carrying out any main-
tenance, switch off the vacu-
um cleaner and disconnect it
from the charging cable.
1
Fig.
a) Turn the rotary brush anti-
clockwise to unlock it and
pull it out to the side of the
floor nozzle.
b) Use scissors to cut through
threads and hairs wound
round the rollers along the
cutting groove.
c) Slide the rotary brush into
the floor nozzle and turn it
clockwise to lock it in place.
‡ The brush roller is also self-
cleaning. Use scissors to cut
through the hairs and fibres
lengthways on two opposite
sides. Then operate the brush
roller for 30 seconds to vacu-
um these up automatically.
2
Caution!
The floor tool must only be
put into operation with the
brush roller fitted.
23