Initial Use; Inserting The Telescopic Tube Into The Floor Nozzle; Adjusting The Telescopic Tube; Attaching The Accessories Holder - Bosch Perfectionist BGL8 Série Mode D'emploi

Initial use

4
Click!
2
1
5
6
a
b
12 12
Inserting the telescopic tube
into the floor nozzle
4
Fig.
Push the telescopic tube into the connecting piece of
the floor nozzle until it locks in place.
To release the connection, press the locking collar
and pull out the telescopic tube.

Adjusting the telescopic tube

5
Fig.
Unlock the telescopic tube by moving the sliding
switch in the direction of the arrow, and adjust to the
desired length.
Attaching the accessories
holder
6
Fig.
a) Place the accessories holder in the required positi-
on on the telescopic tube.
b) Use some pressure to insert the upholstery nozzle
with hard furnishings brush and the crevice nozzle
into the accessories holder from above or below.
en