Maintenance - Schneider Airsystems MAS 500-10-60 D Notice D'utilisation D'origine

5. Clean the compressor if necessary (see
Chap. 2.6.3).
6. Depressurise the compressor (see Chap.
2.6.2).
2.6

Maintenance

Observe the safety instructions!
Interval
Daily
Once after 10 h
50 h
500 h
1,000 h
2,500 h
No later than Tasks
As needed Clean compressor
3/2-way valve
Commissioning Check the oil level, add oil if necessary.
Check screw connections
Weekly Check intake filter
Checking the water separator with filter
After 6 months Check V-belt tension (where applicable)
Clean intake filter
Change oil (1st oil change)
Cleaning the condensate evaporator
After 1 year Change oil (mineral oil)
Change intake filter
Replacing the condensate evaporator filter
mat
Change check valve and insert
Check screw connections
After 2 years Change oil (synthetic oil)
Change V-belts (where applicable)
After 5 years Change safety valve
7. Transport the compressor to the storage
location (see Chap. 2.4.1).
GB
MAS
See
chap-
ter
2.6.3
2.6.4
2.6.5
2.6.12
2.6.7
2.6.8
2.6.9
2.6.7
2.6.6
2.6.10
2.6.6
2.6.7
2.6.10
2.6.11
2.6.12
2.6.6
2.6.9
2.6.13
II/15