Symbols; Safety Instructions - Schneider Airsystems MAS 500-10-60 D Notice D'utilisation D'origine

GB
MAS
Additional symbols on the compressor
Symbol Meaning
Switching On/Off
Oil-free
pressed air
Oiled compressed
air
Fan wheel direc-
tion of rotation
2.3

Safety instructions

WARNING
Uncontrolled movement of compressed
air hose when quick-action coupling is
opened!
Hold the compressed air hose tightly!
WARNING
Burn hazard on the motor, unit, check
valve, connecting hose/pressure pipe
and from hot oil!
Wear safety gloves!
WARNING
Explosion hazard!
Do not use in potentially explosive areas.
Do not suck in any combustible, corrosive
or poisonous gases!
Do not exceed the max. permitted final
compression pressure.
WARNING
Hearing damage from noise during op-
eration!
Wear ear protection!
WARNING
Fire danger due to oil residue!
Clean condensate evaporator at regular
intervals (see maintenance schedule).
1
The symbols depend on the equipment of the compressor
II/12
1
Symbol
com-
Meaning
Start-up steps:
1. Read the operating instruc-
tions before start-up.
2. Remove transport securing
devices.
3. Check oil level.
4. Check direction of rotation.
5. Work with the compressor.
WARNING
Damage to the connexion cable!
Protect it from sharp edges, oil and heat!
Grasp the plug and unplug it from the
power outlet!
• Be calm and focused and ensure proper
operation.
• Protect yourself and other persons, ani-
mals, property, and the environment by
taking the necessary protective measures
and being trained in use of the devices to
prevent harm to your health, property
damage, financial
harm or risk of accident.
• Repairs may be carried out only by
Schneider Druckluft GmbH or its approved
service partners.
• Observe the Instruction Manual for ves-
sels!
• Prohibited: Manipulations, use for pur-
posed other than those intended; tempo-
rary repairs; compressing other energy
sources; removing or damaging safety
equipment; use in case of leaks or mal-
functions; not using original spare parts;
exceeding the specified permitted final
compression pressure; working without
safety equipment; transporting the unit,
maintaining it, repairing it or leaving it un-
supervised while pressurised; using other/
incorrect lubricants; smoking; open flame;
removing stickers.
• Do not do the following: Operate the
unit without engaging the locking brake
and without the maintenance flap, or with
transport securing devices in place.
loss, environmental