Surface Grates; Burner Size - Kenmore 664.7511 Série Guide D'utilisation Et D'entretien

Do not enlarge or distort the port. Do not use a wooden
toothpick. If the burner needs to be adjusted, contact
a trained repair specialist.
4. Replace the burner cap, making sure the alignment pins are
properly aligned with the burner cap.
5. Turn on the burner. If the burner does not light, check cap
alignment. If the burner still does not light, turn off the
burner. Do not service the burner yourself. Contact a trained
repair specialist.

Surface Grates

The grates must be properly positioned before cooking. In the
proper position, the grates should be flush and level. Improper
installation of the grates may result in chipping or scratching
of the cooktop.
To ensure proper positioning, align bumpers on grate bottom
with the indentations in the cooktop.
A
B
A. Bumpers
B. Alignment indentations
A
B
A. Incorrect
B. Correct
A
The surface grates interlock using the hook on one end of the
grate and the indent on the other. To remove the grates, lift the
rear of the left grate off the hook, and then lift the front of the
right grate off the hook and pull apart. To replace the grates,
replace the left grate first. Place the front indent of the right
grate over the hook of the left grate, and then lift the rear of
the left grate and place the indent over the hook on the right
grate.
Although the burner grates are durable, they will gradually
lose their shine and/or discolor due to the high temperatures
of the gas flame.

Burner Size

Select a burner that best fits your cookware. See the following
illustration and table.
Burner Size
Small
Medium
Large
Large (most powerful)
B
A
A. Hook
B. Indent
Recommended Use
Low-heat cooking
■
Melting chocolate or butter
■
Multipurpose burner
■
For large cookware
■
For large cookware
■
Most powerful burner
■
9