Ingeteam INGEREV CITY Duo Manuel D'installation Et Usage page 13

INGEREV GARAGE Basic
2. Install the RS-485 communications cards in the rest of the charging stations that make up the
communication ring. They must be inserted into connectors J15 and J17.
3. Connect the wiring that joins the communications card to the communications card of the following
charging station (see the dark grey cabling in the following figure).
Connect the modem to the communications card of the first charging station (see the white cable in the
following figure).
The jumper of the communications card of the first charging station must remain in place.
ABA2017IQM01_A - Installation and Operation Manual
Pin Signal
1 RS-485 B (+)
2 RS-485 A (–)
6 GND
Communications
card jumper
Ingeteam
EN
ES
FR
IT
13