Technical Features - Riello 40 GS3 Manuel D'entretien

Forced draught gas burners

TECHNICAL FEATURES

Thermal output
Family
Gas
Pressure
Electrical supply
Motor
Capacitor
Ignition transformer
Absorbed electrical power
COUNTRY
GAS CATEGORY
The burner meets protection level of IP 40, EN 60529.
CE marking according to Gas Appliance Directive 90/396/EEC; PIN 0063AP6680.
According to directives: EMC 89/336/EEC, Low Voltage 73/23/EEC, Machines 89/392/EEC and
Efficiency 92/42/EEC.
Gas train according to EN 676.
1 – Air-dampers
2 – Screws for fixing the air-damper
3 – 6 pole gas-train plug
4 – 7 pole electrical controls plug and
socket
5 – Cable gland
6 – Screw for fixing the cover
7 – Lock-out lamp and reset button
NOTE
The cable gland (5) and the screw for fixing the cover (6) supplied with the burner, must be fitted to
the same side of the gas train.
2043
GS3
11 – 35 kW
2 net heat value
3 net heat value 24 – 34 kWh/m
2 min. 10 mbar – max. 35 mbar
3 min. 10 mbar – max. 50 mbar
single phase, 230 V ± 10%
230 V / 0.6 A
2 m F
primary 230 V / 0.2 A
0.1 kW
DE DK - AT - GR - SE
II2ELL3B/P II2H3B/P
3755113
CODE
– 9,500 – 30,000 kcal/h
8 – 12 kWh/m
–
GB - IE
II2H3P
7
6 5 4
1
GB
TYPE
3
– 7,000 – 10,340 kcal/m
3
– 21,000 – 29,300 kcal/m
~
50Hz
secondary 8 kV
LU
II2E3B/P
Fig. 1
3
551T1
3
3
NL
II2L3B/P
1
2
2
D5200