Product Description And Specifications; Intended Use; Technical Data - Bosch Performance Line: Sx Bdu3182 Manuel Du Propriétaire

English – 6

Intended use

The Bosch drive unit from the system generation the
smart system is intended exclusively for driving your
eBike and must not be used for any other purpose.
In addition to the functions outlined here, changes to
software relating to troubleshooting and functional
modifications may be introduced at any time.

Technical data

Drive unit
Product code
Continuous rated power
Torque at drive, max.
Rated voltage
Operating temperature
Storage temperature
Protection rating
Weight, approx.
Bosch eBike Systems uses FreeRTOS (see www.freertos.org).
A)
Bicycle lights
Voltage approx.
Maximum power
– Front light
– Rear light
A) Depends on legal regulations, not possible in all country-
specific models via the eBike battery
Inserting a bulb incorrectly can cause it to blow.
0 275 U07 3D3 | (16.03.2023)

Product description and specifications

Drive Unit
Performance Line SX
Performance Line Sprint
BDU3142
BDU3143
BDU3144
BDU3145
BDU3182
BDU3183
BDU3184
BDU3185
W
Nm
V=
°F 23 to 104
°F 50 to 104
lbs
V=
W
W
Details on noise emissions on the drive unit
The A-rated emission sound pressure level for the
drive unit is < 70 dB(A) in standard operating mode.
If the eBike is moved without authorization, the drive
unit generates an alarm tone as a key feature of the
<eBike Alarm> service. This alarm tone may exceed
the emission sound pressure level of 70 dB(A) and is
80 dB(A) two meters away from the drive unit. The
alarm tone is only available after activating the
<eBike Alarm> service and can be deactivated again
via the eBike Flow app.
250
55
36
IP55
4.4
12
17.4
0.6
Bosch eBike Systems