I-Tech Mio-Sonic Mode D'emploi page 37

Application
Ultrasound head has to work in a uniform way on the area to be
treated in order to avoid adipose anti-aesthetic and solid masses on
non-treated areas.
Ultrasound head has to be in continuous movement in order to
avoid treated zone overheating.
Ultrasound head has to be in continuous contact with the treated
zone through a conductive gel, better if it's a gel with active
ingredient.
We always recommend to treat a maximum area of 20cmX20cm size
for 10 minutes, afterwards treat an adjacent area in order to treat
finally all interested area.
This kind of treatment can be done with hours or days intervals or
consecutively between the different areas.
Cream or gel use with active ingredients promotes ultrasound action.
In fact ultrasound action promotes substances and active principles
penetration into the tissues (Phonophoresis). As a consequence
ultrasound effect will be amplified if you use a specific active
principle.
Cavitation purpose is to transform adipose cells (fat) in a form
which can be easily eliminated by lymphatic system. After a
cavitation treatment we heartily recommend to do optionally:
• a walk at a fast pace for 30/40 minutes
• a pressotherapy treatment for 20/30 minutes
• swimming for 20/30 minutes
in order to promote "liquid" fat elimination.
Thanks to their effects (thermal, chimical, mechanical, cavitation)
ultrasounds are indicated for:
IACER Srl
3MHz beam,
characteristically more
collimated but with
lower tissue
penetration.
1MHz beam,
characteristically less
collimated but with
higher tissue
penetration
37 di 96
.
MNPG63 Rev. 00 del 24/02/11