Installation And Connection - Bartscher 300435 Mode D'emploi

•
Do not move or tip over the device during operation.
WARNING! Electrical shock hazard!
The device can cause injuries if not installed correctly!
Before installation of the local electric mains, compare the technical data of the
device (shown on the identification plate).
Only connect the device if they correspond!
Respect the safety instructions!

5.2 Installation and connection

•
Extract the device and remove the packaging material.
•
Place the appliance on a flat surface and in a safe and dry place which can bear its
weight.
•
Do not place the device on a flammable surface (such as: Table cloths, rugs, etc.).
•
The device must not be close to naked flames, radiators or other sources of heat.
•
Keep the device out of the reach of children. Make sure that small children cannot pull
the device by its cable.
•
Place the device away from the edges of the work surface. Leave sufficient space in
front of the device so that the bag can be filled with food while vacuum packed.
•
Make sure there is sufficient air circulation, provide at least 20 cm of free space on all
sides and 1 m above the device.
•
The outlet circuit must be fixed at least at 16A. Plug the device directly to the wall
socket without using extension cords or other sockets.
•
Position the device so that the plug is accessible and it can be unplugged quickly
when necessary.
- 42 -