Bartscher 300435 Mode D'emploi page 55

d) If necessary, adjust the sealing time (see point
5.5.3 " Settings/Sealing time settings") (Fig. J).
e) Press the "A" button (2B) for the automatic cycle.
The device performs a vacuum packing cycle in
automatic mode. Wait for the red indicator light of
the "T" key to quit flashing (Fig. K).
f) Unlock the lid by turning one of the two knobs (7) of
the "Lock & Unlock System" device (Fig. L) and
remove the bag.
g) Make sure sealing is uniform. A correct sealing
must be smooth, straight and without any creases,
the seam must not show the pattern on the bottom
layer (Fig. M).
- 53 -