Using The Product - Beko RDNE700E40XP Manuel D'utilisateur

Using the product

3. Fault Condition Indicator
This indicator ( ) shall be active when your
refrigerator cannot perform adequate cooling or in
case of any sensor error. "E" shall be displayed on
the Freezing Compartment temperature indicator
and figures such as 1,2,3... shall be displayed on the
cooling compartment temperature indicator. These
figures provide information to the authorized service
on the error that has occurred.
Exclamation mark may be displayed when you load
warm food to the freezing compartment or keep the
door open for a long period of time. This is not a fault,
this warning shall be removed when the food is cooled
down or when any key is pressed.
4. Energy Saving (Display Off) Indicator
Energy saving function is enabled automatically and
the energy saving symbol (
the door of the product is not opened or closed for
some period of time. When the energy saving function
is active, all symbols on the screen other than the
energy saving symbol shall be turned off. When the
energy-saving function is active, pressing any key or
opening the door will deactivate the energy-saving
function and the display signals will return to normal.
The energy-saving function is a function activated
ex-factory and cannot be cancelled.
5. Freezing Compartment Temperature Setting
Key
Temperature setting is made for cooler compartment.
Pressing this key will enable the freezer compartment
temperature to be set at -15,-16,-18,-19,-20,-22,-
24 Celcius.
6. Compartment Conversion Key
When the compartment conversion key is pressed for
3 seconds, freezer compartment switches between
cooler, off, and freezer modes respectively. When it is
operated as cooling compartment, the temperature
of the compartment may be set at 8,7,6,5,4,3,2
and 1 Celcius. In case of OFF mode, compartment
temperature indicator shall display "- -".
7. Cooling Compartment Temperature Setting
Key
Allows setting of temperature for cooler compartment.
) is displayed when
14 / 32 EN
Pressing this key will enable the cooling compartment
temperature to be set at 8,7,6,5,4,3,2 and 1 Celcius.
8. Cooling Compartment OFF (Vacation) Function
Key
Press the key for 3 seconds to activate the vacation
function. Vacation mode is activated and the LED
on the key is illuminated. "- -" shall be displayed on
the Cooling Compartment temperature indicator and
the cooling compartment does not actively perform
cooling. You shall not keep your food in the cooling
compartment when this function is activated. The
other compartments continue to cool according to the
set temperatures. Press the key for 3 seconds again
to cancel this function.
9. Wireless Key
This key is used to make a wireless connection with
your product via HomeWhiz mobile app.
When the key is pressed for a long period (3
seconds), the wireless connection symbol on the
display/screen flashes slowly (with intervals of 0.5
seconds). The home network is initialized on the
product this way.
After achieving wireless connection with the product,
wireless connection symbol (
continuously.
When the initial connection is established, you may
activate/deactivate the connection with a short press
on this key. The wireless connection symbol shall flash
quickly (at 0.2 second intervals) until the connection
is established. When the connection is active, the
wireless network symbol shall light up continuously.
If the connection cannot be established for a long
period, check your connection settings and refer to
the "Troubleshooting" section provided in the user
manual.
HomeWhiz application shall be used for wireless
connection. Installation steps are described on the
application during installation.
You may access the application by reading the QR
code available on the HomeWhiz label on the product.
Application is offered through App Store for IOS
devices, and through Play Store for Android devices.
) illuminates
Refrigerator / User Guide