Preparation; What To Do For Energy Saving; First Operation - Beko RDNE700E40XP Manuel D'utilisateur

5

Preparation

A
Read the "Safety Instructions" section first!

5.1 What to do for energy saving

mehmet
A
Connecting the product to electronic
energy-saving systems is harmful, as it
may damage the product.
Do not keep the refrigerator doors open for
long periods.
Do not place hot food or beverages into the
refrigerator.
Do not overfill the refrigerator; blocking the
internal air flow will reduce cooling capacity.
Depending on the product's features;
defrosting frozen foods in the cooler
compartment will ensure energy saving and
preserve food quality.
Since hot and humid air will not directly
penetrate into your product when the doors
are not opened, your product will optimize
itself in conditions sufficient to protect your
food. Functions and components such as
compressor, fan, heater, defrost, lighting,
display and so on will operate according to
the needs to consume minimum energy under
these circumstances.
Food shall be stored using the drawers in the
cooler compartment in order to ensure energy
saving and protect food in better conditions.
Refrigerator / User Guide

5.2 First operation

Before using your refrigerator, make sure the
necessary preparations are made in line with
the instructions in "Safety and environment
instructions" and "Installation" sections.
Keep the product running without placing any
food inside for 12 hours and do not open the
door, unless absolutely necessary.
C
A sound will be heard when the
compressor is engaged. It is normal to
hear sound even when the compressor is
inactive, due to the compressed liquids
and gasses in the cooling system.
C
It is normal for the front edges of the
refrigerator to be warm. These areas are
designed to warm up in order to prevent
condensation.
C
For some models, indicator panel turns
off automatically 1 minutes after the door
closes. It will be reactivated when the door
is open or any button is pressed.
11 / 32 EN