Hamilton Beach 70710 Manuel page 7

840071400 Ev03.qxd 5/11/00 2:14 PM = 7
4. Cut food to fit food chute. Pack food 6. Select speed. While Ne on
chute tightly with food. Insert food
. pusher in chute. Always use the
food pusher to feed food into the
chute. NEVER PUSH FOOD
THROUGH CHUTE WITH HANDS.
5. Plug in unit and process food.
food pusher, push ON (1) or
PULSE (M) to process food.
7. When food chute is empty, push
OFF (O) or release from PULSE (M)
position. Wait until blade has
stopped rotating before removing
cover.
How to Operate the Controls
Pulse/Momentary
The control panel provides quick-
reference graphics which indicate
the correct blade or disc for a job:
Speed Switch: Move the switch to
either Low (•) or High (ee) speed
before tuming on the motor with the
control switch.
Control Switch: This switch gives you
three choices: ON (1), OFF (O) or
PULSE/MOMENTARY
Selecting the ON (I) position will
cause the motor to run continuously
until you move the switch to OFF (O).
The PULSE/MOMENTARY (M) position
will cause the motor to run only until
you release the switch; then it auto-
matically springs back to the OFF (O)
position.