Reception Controls - Sony XAV-60 Mode D'emploi

Reception controls

Touch the display if the reception controls are not shown.
No. Item
"Source List"
1
"ATT"
2
"Top"
3
m/M
4
./>
5
"Band"
6
"Receive Menu"
7
"Preset List"
8
"PTY List"
9
Indications during reception
A
Source List ATT
15
C
16
1
Source List
4
Touch to
open the source list. (page 11)
attenuate the sound. To cancel, touch again.
open the source list. (page 11)
tune manually.
Touch and hold to skip frequencies continuously.
tune automatically.
open the band list and change the band.
open the receive menu, which contains the following.
• "Mono": Touch to activate the monaural mode if FM reception
is poor. To restore stereo reception, select "OFF."
• "Local": Touch to only tune into stations with stronger signal.
To tune normal stations, select "OFF."
• "IF": Touch to set to "Wide" to hear FM stereo broadcasts in
stereo and with full frequency reception. To narrow the
reception frequency automatically to eliminate noise, select
"Auto."
list up stored stations, or store stations. (page 21)
open the PTY list. (page 22)
B
Top
Receive Preset PTY
Band
Menu List List
12:00
D
2
ATT
Receive Preset
Band
Menu List
15
5 6 7 8
A Current source icon*
B Band number, Preset number*
C Volume level* 3
D Setting status (CSO, EQ7, RBE)
*1 Appears only when the controls are shown.
*2 Appears only when the station stored in memory is
received.
*3 When ATT is activated,
3
Top
PTY
List
12:00
9
1
2 , Frequency/status
appears.