Assembly Instructions; Preparing The Tabletop; Assembling Your Table - ergoCentric upCentric UPMOD-2L Guide De L'utilisateur

Assembly instructions

Preparing the tabletop

Step 1: Lay protective matting / sheet on floor or work surface
to protect the tabletop surface.
Step 2: Carefully place tabletop down on work surface with
the decorative laminate facing down and brown surface facing up.

Assembling your table

Step 1: Place the table leg housing ( I ) on a flat surface, and insert leg ( K )
into the table leg housing. Fasten table leg housing to table leg
using 4 x bolts ( B ) starting with the two holes closest to the back
of the bracket. Repeat for second column.
Step 2: Align the table leg housings to
the pilot holes on your tabletop.
Secure table leg housings in place
using screws ( C ) – 8 per leg
housing. If you are retrofitting
your frame to a tabletop without
pilot holes, jump to Step 2b for
instructions and tips for installing
the frame to a different rectangular
or square shape tabletop.
8 upCentric – UPMOD-2L Owner's Manual | Guide de l'utilisateur
®
First
Second