ergoCentric upCentric UPMOD-2L Guide De L'utilisateur page 5

Gyro-sensor anti-collision system
Every upCentric electric height adjustable table has a built in gyro-sensor
®
based anti-collision system. This patented anti-collision system uses precision
gyroscope technology, allowing for three axis collision detection.
This sensor provides enhanced safety to help prevent user injury and
equipment damage. When the table is in motion, if it encounters any
external resistance or unbalance in the tabletop, the gyro-sensor picks up
the disturbance immediately and enacts a safety stop. The table will stop
moving immediately and reverse adjustment by 1" to move away from the
obstruction is has come in contact with.
Power-saving and quick start wake-up
upCentric electric height adjustable tables have the lowest power draw of
any electric height adjustable table on the market. When no buttons have
been pressed for 30 seconds, the control box goes into stand-by mode,
where the control box uses less than 0.1 W of electricity.
When in sleep mode, press any button to wake the system up. The quick
start feature allows the table to start moving immediately once a button
has been pressed, with no wake-up delay.
Battery option
The UPMOD - 2L control box has an additional port for connecting an
external battery pack. The battery can be easily removed and recharged
with a standard Micro-USB charger, making charging simple.
Make it mobile! Adding the battery pack allows you to use your upCentric
electric height adjustable table without plugging it into a wall outlet.
Combine this with optional casters and make your upCentric table mobile.
You can also use the battery pack as a battery back-up. If you have a battery
pack connected to the control box and the AC wire is plugged into a wall
outlet, the battery pack will charge using the AC wire, keeping your table
fully function during a power shortage or outage.
Parallel connectivity
The UPMOD - 2L upCentric is equipped with parallel connectivity.
This feature allows you to connect two 2-leg tables together and operate
them as one 4-leg table. A Y-splitter cable is required to enable this.
4 upCentric – UPMOD-2L Owner's Manual | Guide de l'utilisateur
®