Retrofitting Onto Existing Work Surface - ergoCentric upCentric UPMOD-2L Guide De L'utilisateur

Retrofitting onto existing work surface

Step 2b: Rectangular work surfaces
• Position the table leg housings at both ends of the work surface,
centered front to back, and align them with the edges of the work
surface, 0.5" - 1" in from the edge.
• Secure table leg housings in place using screws ( C ) – 8 per leg housing.
Step 3: Align handset ( H ) along the front edge of
the tabletop, 1"- 3" from the desired corner,
and attach handset to the tabletop with
2 x screws ( D ).
upCentric – UPMOD-2L Owner's Manual | Guide de l'utilisateur
®
9