ergoCentric upCentric UPMOD-2L Guide De L'utilisateur page 11

Step 4: Attach control box ( F ) to tabletop using 2 x screws ( C ).
The ideal location for the control box is centered left to right,
and 6" from the back edge of the tabletop.
TIP: Y ou can place the control box anywhere on the tabletop.
Where you place the control box may depend on where you want
the AC cable ( G ) to hang down from the tabletop, or if there are
other items being attached to the tabletop that may interfere with
the control box.
Step 5: Attach All cables to the control box:
• Plug the AC cable ( G ) into the port marked AC
• Plug the wires from the legs ( K ) into the ports
marked M1 and M2
• Plug the wire from the handset ( H ) into the port marked H
Step 6: Bundle all loose cables together and zip tie together using
zip ties ( L ). Attach zip ties ( L ) to tabletop using screws ( C ).
10 upCentric – UPMOD-2L Owner's Manual | Guide de l'utilisateur
®