Warm Tech CAC20KW Instructions D'origine page 43

Masquer les pouces Voir aussi pour CAC20KW:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Only install the heater in normal upright position.
Do not place the heater near walls, corners or low ceilings.
Do not place the heater below a socket outlet.
Do not place the heater on moving vehicles or where it can tip over.
Keep the heater away from flammable, combustible, explosive or
corrosive materials.
Keep the heater away from curtains or similar materials that could block
the air inlet and outlet.
Never block or restrict the air inlet and outlet for any reason.
Keep the power cable away from heat sources, sharp edges, cutting and
moving parts.
Do not expose directly to the weather or to excessive humidity.
Do not place the heater in the immediate surroundings of a bath, shower
or swimming pool.
Follow general and special fire safety regulations in force in all fields of
applications. In any case ensure the following minimum safety
clearances from materials or objects in the surroundings of the heater:
Floors and ceilings must be made of fireproof materials in the place
where the heater is operated.
Do not connect direct-fired heaters to air ducts.
Side:
Air inlet side:
Top:
Hot air outlet side: 3 m
Floor:
0.6 m
1 m
1.5 m
0 m
43

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cac30kwCac50kw

Table des Matières