Scale House HLD150 Notice D'utilisation page 17

ZEro
tArE
MAn.tAr
rEQ.WEi
Requests range
(csec)
Weight request
command
tErM.tX
(*) Table refer himself to the configuration of the 3590E with homologated HLD. If you use a non-homologated HLD, set one digit 0 in the
parameter CAPAC more than the value of the table, in the parameter dECiM set the decimal for the internal use of the HLD, one more than
those in this table and disable the parameter « round.S «
On the HLD balance set the following parameters:
F3 Con: S 232 , P Prt , b 9600 , tp .
F4 Pro: normal
Enable
Enable
Tare command >> T
CMD.VAL.
Tare command >> W
Enable
CRLF
Enable
Enable
Tare command >> T
CMD.VAL.
Tare command >> W
Enable
CRLF
17
050
REXT