Gima NB-810B Notice D'utilisation page 29

29
3. Add the liquid:
pour the liquid drug into drug storage area (near the nebulizing head side)
as in Fig. 7.
Note
1) The maximum and minimum volume of liquid is 8ml (at MAX LEVEL
mark) and 0.5ml respectively
2) If it is needed to adjust the temperature of liquid, add hot or cold water
into the temperature adjustment storage area.
Fig. 7
4. Close Nebulizer:
As shown in Fig. 8, hold the main unit of
the device with your left hand and close
the nebulizer cover with your right hand,
press the lock downwards with the thumb
to the point when you hear a "ka" sound
which indicates a good closing state.
5. Reinstall the Outer Cover
(see the section – Assembling the Device)
6. Install mouthpiece or mask:
1) The enclosed parts include a mouthpiece, which is intended for
medication through throat.
• Install the mouthpiece: connect the mouthpiece to the outlet of outer
cover along the direction of arrow (see Fig. 9).
ENGLISH
Drug storage area
Nebulizing head
Temperature adjustment
storage area
Fig. 8