Horizon Fitness T303 Manuel Du Propriétaire page 7

ASSEMBLY
WARNING
There are several areas during the assembly process that special attention must be paid. It is very important to follow the
assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed
correctly, the treadmill could have parts that are not tightened and will seem loose and may cause irritating noises. To
prevent damage to the treadmill, the assembly instructions must be reviewed and corrective actions should be taken.
Before proceeding, find your treadmill's serial number located on a white barcode
sticker near the on/off power switch and power cord and enter it in the space provided
below.
ENTER YOUR SERIAL NUMBER AND MODEL NAME IN THE BOXES BELOW:
SERIAL NUMBER:
TM
HORIZON
MODEL NAME:
» Refer to the SERIAL NUMBER and MODEL NAME when calling for service.
TREADMILL
SERIAL NUMBER LOCATION
7