Horizon Fitness T303 Manuel Du Propriétaire page 25

CUSTOM 1 & 2: Lets you create and reuse a perfect workout for you with specific speed, incline and time
combination. The ultimate in personal programming. Time-based goal.
1) Press the CUSTOM 1 or 2 key to select a custom program. Press ENTER to confirm.
2) Set the workout time using
3) Use to set the speed for each segment. Press ENTER to confirm speed for each segment of the workout.
4) Use to set the incline for each segment. Press ENTER to confirm incline for each segment of the workout.
5) Press START to begin workout.
USING YOUR CD / MP3 PLAYER
1) Connect the included AUDIO ADAPTOR CABLE to the AUDIO IN JACK above the
left console speaker and the headphone jack on your CD / MP3 player.
2) Use your CD / MP3 player buttons to adjust song settings.
3) Remove the AUDIO ADAPTOR CABLE when not in use.
ENERGY SAVER™ (STANDBY MODE)
This machine has a special feature called Energy Saver™ mode. This mode is NOT automatically activated. When
Energy Saver mode is activated, the display will automatically enter standby mode (Energy Saver mode) after 15 minutes of
inactivity. This feature saves energy by disabling most power to the machine until a key is pressed on the console. This feature
can be turned on or off in the engineering menu.
To enter the engineering menu, press and hold the Up incline key and Down speed key for 3-5 seconds. Use the up/down keys
to navigate through the menu to ENG3. Press ENTER to select. Use up/down keys to select ENRGY SVE ON or OFF. Press
and hold STOP for 3-5 seconds to exit ENG3. Press and hold STOP again for 3-5 seconds to exit the engineering menu.
and press ENTER.
25