Bertazzoni RWC60B4DNRP Instructions D’installation, D’utilisation Et D’entretien page 14

INSTALLATION INSTRUCTIONS
• Do not connect other equipment plugs behind this
appliance. If the humidity level is high where the
appliance is being used, its exterior surfaces may
become corroded. To prevent corrosion, keep the
installation room dry and well-cleaned.
To prevent the risk of electric shock:
• Connect the plug to a grounded outlet.
• Do not remove plug's grounding prong.
• Do not use adapters.
• Do not use extension cords.
CAUTION
Do not connect the grounding cable to the
gas line. Please have the grounding
checked by a qualified electrician if you are
not sure about the grounding of the
appliance. Do not install a fuse on the
neutral line or on the grounding circuit.
CAUTION
Failure to follow these instructions may
result in fire, electric shock or death.
Connecting
conductor in the wrong place may lead to
electric shock. Please have the grounding
checked by a qualified electrician or service
technician if you have any doubt about the
proper grounding
Installation, repairs and other procedures
performed by unqualified persons may give
rise to hazards. Before installing the
appliance, make sure that the voltage, load
and circuit current parameters on the data
plate are in compliance with the power
supply in your house.
14
the appliance's grounding
of the appliance.
VENTILATION
The heat removed from the cooling compartment needs to
be dissipated into the air around the appliance. Incorrect
ventilation can lead to premature compressor failure,
excessive power consumption and total system failure, and
it may invalidate the warranty provided with the appliance.
This wine cooler has a front air outlet design. To ensure
good ventilation, no other objects can be placed directly in
front of the wine cooler.
NOTE
The air vent at the front of the appliance
must never be covered or blocked in any
way.