Bertazzoni RWC60B4DNRP Instructions D’installation, D’utilisation Et D’entretien page 12

SPECIFICATIONS
APPLIANCE DESCRIPTION
5
4
1) Wine Shelf
2) Control Panel and
Temperature Zone
Divider
NOTE
The figures in this user manual are
schematic and may not match the product
exactly. If your product does not have the
parts described, the information applies to
other models.
This unit is equipped with 3 temperature probes:
• 1 NTC1 in the upper temperature zone
• 1 NTC2 in the lower temperature zone
• an external temperature probe NTC3.
It is also equipped with four, 12V fans, 1 inverter
compressor and 2 heating elements.
• Upper Temperature Zone Fan: FAN1
• Middle Temperature Zone Fan: FAN3
• Lower Temperature Zone Fan: FAN4
• Compressor Fan: FAN2
12
3) Electromagnetic Push to
Open
4) Activated charcoal filter
5) Front ventilation
TECHNICAL SPECIFICATIONS
ELEMENT
Plug type
Voltage
1
Frequency
2
Fuse
Amperage
Capacity
3
Refrigerant, volume and further technical specifications can
be found on the rating plate.
Fig. 1 ROOM TEMPERATURE
The permitted room temperature depends on the climate
class:
CLIMATE CLASS
SN (Sub Normal)
N (Normal)
ST (Sub Tropical)
T (Tropical)
Information on the climate class can be found on the rating
plate.
The normal operation of the wine cooler may be affected in
an environment above or below the optimal room
temperature range. For example, when the wine cooler is
operated in an extremely cold or hot environment, the
temperature inside the cabinet will fluctuate and sometimes
fail to reach the set temperature range of 5-20℃. In high
humidity seasons, some condensation may appear on the
outer surface of the wine cooler, which will disappear when
the humidity decreases. It is recommended to install the
appliance in a dry and ventilated room or air-conditioned
room.
DESCRIPTION
SCHUKO
220 V – 240 V
50 Hz
10 A
0.6 A
24 Bordeaux bottles
PERMITTED ROOM
TEMPERATURE
+ 10 ℃ to + 32 ℃
+ 16 ℃ to + 32 ℃
+ 16 ℃ to + 38 ℃
+ 16 ℃ to + 43 ℃