Pollet Pool Group InverPro IP20 Manuel D'installation Et D'utilisation page 16

5.4 App Pairing
Please make sure your pump is turned on before you start.
Option 1 (Recomended): with WiFi and Bluetooth
Network requirement: 2.4GHz; 2.4GHz and 5GHz into one SSID; but no seperate 5GHz network
1 Please confirm that your phone is connected to Wi-Fi and your Bluetooth is on.
Press for 3 seconds until hearing "Beep" to unlock the screen.
2
Press for 5 seconds until hearing "Beep" then release.
3 Click "Add Device", and then follow the instructions to pair device.
16
will flash.