Peruzzo CANGURO PROFESSIONAL Notice D'instructions page 25

F
TRACTOR RELEASE
• The machine release fro the tractor must be
done placing it on perfect flat surface, with trac-
tor engine turned off , tractor brake activated,
disconnect the key from dashboard, insert the
gear and disconnect the PTO.
• Operating as per following points :

Slowly lower the tractor linkage in order to
place the machine on the ground surface with-
out hitting it.

Release the hydraulic tubes from tractor
plugs, checking that no oil drops must touch
the ground surface.

Release the PTO shaft from tractor PTO.

Release the tractor 3 pints linkage from ma-
chine housings by unlocking and taking out its
hair pin cotters and pins.

After checking that are no more parts linked
to the tractor, turn on the tractor engine and
move it slowly away from the machine.
DESENGATE DO TRACTOR
•
Para desengatar a alfaia, apoie-a num
terreno plano e firme, desligue o motor do
tractor, retire a chave da ignição, engate o
travão de estacionamento e a mudança e
desengate a TDF.
Proceda de acordo com os seguintes pontos:
• baixe lentamente o braço de elevação do
tractor até a alfaia ficar apoiada no chão.
• Retire os tubos hidráulicos do tractor e
tente não deixar cair gotas de óleo no chão.
• retire o cardan do tractor
• solte o terceiro ponto e retire os pernos de
ligação das barras de elevação.
• Verifique se retirou todas as peças ligadas
às barras do tractor e desloque o tractor para a
frente até a alfaia ficar desengatada.
25
PT