NORME ANTINFORTUNISTICHE
Al fine di evitare infortuni è necessario fare attenzione
alle indicazioni riportate nelle etichette di sicurezza ap-
plicate sulla macchina.
Fare sempre attenzione che durante il lavoro non
ci siano persone nel raggio di azione, soprattutto
bambini.
Tenere sempre questo libretto a portata di mano
dell'operatore.
Quando la macchina non lavora, spegnere il motore del
trattore, sostare su di un terreno in piano con il freno di
stazionamento innestato, con la marcia innestata, la
presa di forza disinserita e con l'attrezzatura appoggia-
ta al terreno.
Le paratoie anteriori devono essere sempre in
buone condizioni onde evitare un lancio di sassi o
altro materiale.
Non è consentito sostare nell'area di apertura e
scarico del cassone idraulico.
Nella fase di scarico la presa di forza deve esse-
re sempre disinserita e il rotore fermo completa-
mente.
Non eseguire nessun lavoro di pulizia o manu-
tenzione con il motore in moto, né con la presa di
forza inserita.
Prima di inserire la presa di forza accertarsi che il
numero di giri sia quello prestabilito (540).
Per la circolazione su strada è necessario attenersi alle
norme del codice stradale.
In lavorazione l'operatore deve usare occhiali di
protezione e mascherina antipolvere, qualora il
trattore non sia cabinato.
E' bene ricordare che un operatore prudente è la
migliore sicurezza contro qualsiasi infortunio.
I
SAFETY REGULATIONS
In order to avoid accidents is necessary pay attention at
the indications mentioned on the indications men-
tioned on the safety labels placed on the machine.
Pay always attention that during the work no
people and moreover children must be on the
range of action.
Keep this manual within reach always of the user.
When the machine doesn't operate, stop the tractor
engine and park on a flat ground with hand break en-
gaged, with speed engaged and P.T.O. disconnected
and the equipment laid on the ground.
The front safety plates gate must be in good con-
ditions always in order to avoid a dangerous
throwing of stones or others materials.
It is not allowed the presence of people under-
neath the area of complete collector opening.
During collector discharge operation the tractor
P.T.O. must be disconnected always.
Don't carry out any cleaning work or mainte-
nance while engine is working nor with con-
nected P.T.O.
Before connecting the P.T.O. verify that the rpm
must be the one prearranged.
For road transport is necessary to observe the highway
code norms.
While working the user must ware protection
glasses and in case the tractor is not supplied
with its cab the user must ware the mask against
dust.
A careful user is the best safety against any kind of
accident.
14
GB