Samsung RF23DB Serie Mode D'emploi page 43

STEP 7 Initial settings
By completing the following steps, the refrigerator should be fully functioning.
1. Plug the power cord into the wall socket to turn the refrigerator on.
2. Open the door, and check if the interior light lights up.
3. Set the temperature to the coldest setting, and wait for about an hour. Then, the
freezer will be slightly chilled, and the motor should be running smoothly.
4. Wait until the refrigerator reaches the set temperature. Now the refrigerator is ready
for use.
STEP 8 Final check
When installation is complete, confirm that:
• The refrigerator is plugged into an electrical outlet and grounded properly.
• The refrigerator is installed on a flat level surface with a reasonable clearance from
walls and cabinets.
• The refrigerator is leveled and is sitting firmly on the floor.
• The door opens and closes freely, and the interior light turns on automatically when
you open the door.
English 43