Samsung RF23DB Serie Mode D'emploi page 37

• If the ring is placed above the grommet, it may cause noise when the refrigerator door
is opened or closed.
Adjusting the freezer door height (applicable models only)
Adjusting the gap between the fridge doors and the main body of the refrigerator
(applicable models only)
• Before aligning the door height, make
sure the refrigerator is leveled properly.
Use the leveling legs for this purpose.
• You can adjust the height of both
freezer doors using the lever located at
the bottom hinge.
• Open the door, lift it a little, and then
turn the lever left or right to adjust the
height.
• You can adjust the gap between both
fridge doors and the main body of the
refrigerator using the adjustment bolt
located at the bottom of the fridge
compartment.
• Lift the door gasket and located the
adjustment bolt underneath the gasket.
Use the 4 mm Allen wrench to adjust
the gap.
CAUTION
Make sure you firmly attach the gasket.
Otherwise, cold air from the refrigerator
may leak.
English 37