Lubrication; Two-Year Warranty - Genesis GMSUDR15L Manuel D'utilisation

CLEANING
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be
damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.
WArning:
Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come
in contact with plastic parts. Chemicals can damage, weaken ordestroy plastic which may result in serious personal
injury.
Electric tools used on fiberglass material, wallboard, spackling compounds, or plaster are subject to accelerated wear and possible premature failure
because the fiberglass chips and grindings are highly abrasive to bearings, brushes, commutators, etc. Consequently, we do not recommended using
this tool for extended work on these types of materials. However, if you do work with any of these materials, it is extremely important to clean the tool
using compressed air.

LUBRICATION

This table saw are permanently lubricated at the factory and require no additional lubrication.

TWO-YEAr WArrAnTY

This product is warranted free from defects in material and workmanship for 2 years after date of purchase. This limited warranty does not cover normal
wear and tear or damage from neglect or accident. The original purchaser is covered by this warranty and it is not transferable. Please return the tool
to store location of purchase along with your receipt, and you will receive a new drill or a refund. THIS PRODUCT IS NOT WARRANTED IF USED FOR
INDUSTRIAL OR COMMERCIAL PURPOSES.
TOLL-FrEE HELP LinE
For questions about this or any other GENESIS Product, please call Toll-Free:
www.richpowerinc.com
Or visit our website:
10" Slide Compound Laser Miter Saw
Operator's Manual
888-552-8665
.
GMSUDR15L