Installing And Connecting; Use; First Use - Dovre 100CBS Installation Et Mode D'emploi

8. Use the supplied stove sealant to seal the con-
nection collar and the cover to the appliance.
12
Connecting to the top
You need a special connection collar to connect on
the upper side. This is not supplied with the appli-
ance.
1. Remove one of the rectangular covers from the
2. Install the special connection collar on the opening
09-20020-254
Connecting via the attachment
The attachment 200 increases the surface of the
stove that exchanges heat, thereby increasing effi-
ciency. When using the attachment that is sold sep-
arately, you are able to make a side connection and an
upper connection via the attachment.
1. Remove the rectangular cover from the upper side
2. Install the attachment on the openings created.

Installing and connecting

1. Position the appliance in the correct place, and
2. Connect the appliance to the flue hermetically.
3. Re-position all removed parts to the correct places
The appliance is now ready for use.

Use

First use

When you use the appliance for the first time, make
an intense fire and keep it going for a good few hours.
This will cure the heat-resistant paint finish. This may
result in some smoke and odours. You could open win-
dows and doors for a while in the area in which the
appliance is located.
The special cover (A) can be ordered as an
option using number 03.15318.020.
upper side of the appliance.
created.
of the appliance.
make sure it is level.
in the appliance.
Never use the appliance without the ver-
miculite inner plates.
Subject to change because of technical improvements