Configuration Menu - Inventum Ika6035 Manuel D'utilisation

Table des Matières
Les langues disponibles

Les langues disponibles

CONFIGURATION MENU

This appliance allows you to set different menus for your convenience. Please check the below table to see what options there are:
Menu
Description
c0
Resetting to factory settings
c3
Setting the power management
c5
Turning the sound on or off
c7
Setting the brightness of the displays
h1
Setting the hood to extraction or recirculation
h2
Setting the automatic switch-off mode of the hood
h3
Resetting the saturation indicator
CHANGING THE CONFIGURATION
Follow the steps below to enter the configuration menu and change the setting of one of the menus.
Note:
Steps 1 to 3 must be completed within 15 seconds, otherwise you cannot enter the configuration menu and you must restart.
If no valid keys are pressed within 30 seconds after entering the configuration menu, the appliance will automatically
shut down without saving the settings.
1. Press the power button to turn on the appliance while it is turned off.
2. Long press the child lock button for 3 seconds. The letters Lo will appear on the display when the appliance is locked.
3. Long press the boost button for 3 seconds to confirm you want to enter the configuration menu. The letter c will appear
on the left front display.
4. Short press the boost button to enter the configuration menu. The left front display will show the current menu, for
example c5 and the timer display will show the current value of the corresponding menu, for example 1.
Note:
Pressing any other buttons in this step will automatically exit the menu.
5. Short press the child lock button to switch between the menu numbers, until you reach the menu you want to change.
6. Short press the boost button to switch between the options.
7. Long press the child lock button for 3 seconds to save all modified menu settings and exit the configuration menu.
30
English
Options
0: no reset
1: reset
28, 35, 45, 58 or 74
0: sound on
1: sound off
1 to 5
0: not applicable
1: recirculation
2: extraction
0: off
1: 1 min.
2: 2 min.
5: 5 min.
10: 10 min.
20: 20 min.
0: no reset
1: reset
Default
0
74
0
3
2
0
0
Table des Matières
loading

Table des Matières