Etac R82 High-low:xo Manuel D'utilisation page 52

accessories and replace any worn out
parts before use.
• Do not expose the gas spring to pressure
or high temperatures. DO NOT puncture
• Do not expose the piston rod to scratches
etc. It is important to use a cloth or the
like, if tools are used to adjust the gas
spring.
• When mounting a Panda Futura seat size
4 on any High-low:xo frame, you must
mount the anti-tip device that comes as an
accessory to the product.
• The power unit does not have a safety
stop.
• Do only use the power unit within specified
working limits.
• Do not attempt to repair any part of the
power unit.
• The user must not occupy the product
when it is lifted from the ground.
• The product is approved for transportation
in vehicles according to ISO 7176-19. More
information can be found in the document
"M1470 Transportation in Motor Vehicles"
supplied with the product.
• The outdoor frame must be in a lowered
position during transportation in motor
vehicles. See the measurement chart for
the maximum height of the adaptor during
transportation.
• In accordance with ISO 7176-19 annex
D the product is evaluated regarding
the overall rating of belt restraint
accommodation.
Rating for: ease of properly positioning a
three point belt restraint.
The product receives a score of
"excellent".
Rating for: the degree to which proper
three point belt restraint positioning can
be achieved.
The product receives a score of "good".
• The device conforms to ISO 7176-8,
covering requirements and test methods
for static, impact and fatigue strengths.
• Unoccupied device is suitable for land and
air transport.
• Details covering EMC can be found in the
appendix "EMC details" supplied with the
product.
• Depending on the size, the device is
intended for occupant mass groups I and II
(ISO 7176-5).
EN
52
etac.com