Imetec R5301 Instructions Pour L'utilisateur page 23

ATTENTION: In order to ensure maximum safety, the rapid heating
temperature (levels 9 to 6) starts to drop after 30 minutes when using
remotely, reaching level 5 after an hour. The display will continue to
show the temperature selected initially. The product heats up rapidly;
simply activate the control device approximately 15-20 minutes before going
to sleep for optimal warmth in bed.
WARNING!
sheets when in use.
AUTO SHUT OFF TIMER
The heated mattress cover has an automatic switch-off system that can be set from 1 to 12 hours (at 1-hour
intervals) via the Alexa app or voice command, or by pressing the Timer selector button (15) on the control
device. At switch-on, the control device automatically sets 1 hour on the auto-off timer and LED 1 lights up on
the display (13). To modify the timer, select the required auto-off time via the app or with a voice command,
or press the Timer selector button (15). Every time the auto-off time is reset, the timer starts again from zero.
When the time has elapsed, the bed warmer will switch off and the control device will turn OFF.
NB: if the power supply is interrupted and then restored, the control device
will turn OFF.
SELECTING THE PROGRAMS
Before launching a program, turn on the control device. The programs can be selected via the
Alexa app or voice command, or by pressing the Program selector button (6) on the control
device.
Choose from the following predefined programs:
• Anti-dust mite program (can only be selected by pressing the Program selector button (6)
on the control device)
• Wake Up program (can be selected via the Alexa app or voice command, or by pressing the
Program selector button (6) on the control device)
• Comfort program (can be selected via the Alexa app or voice command, or by pressing the
Program selector button (6) on the control device)
• Tropical program (can be selected via the Alexa app or voice command, or by pressing the
Program selector button (6) on the control device)
NB: the pre-set programs cannot be modified.
Anti-dust mite program
The Anti-dust mite program is a special sanitising program that interrupts the lifecycle of the
dust mites in the bed in a natural manner, thanks to the heat. To ensure good bed hygiene,
DO NOT place the control unit under the pillow or under the
EN
22