Transportation; Environmental Protection - Fuxtec Fx-Rmt84M Manuel

defective parts immediately:
•
Lateral ejection protection
•
Rear ejection guard
•
Grass catcher
•
Intake grille

28. TRANSPORTATION

•
WARNING! When transporting the machine with a truck or trailer, use a ramp with sufficient
load-bearing capacity and a suitable width and length.
•
Loading may only be carried out with the engine switched off, the drive deactivated and ideally
with the assistance of other persons .
The following measures are required during transportation:
•
Close fuel tap (if fitted)
•
Fully lower the cutting device or attachments
•
Apply the parking brake
•
Securely fasten the machine to the transport vehicle with sturdy ropes or chains

29. ENVIRONMENTAL PROTECTION

•
Protecting the environment should always be the top priority when using the machine - in the
interests of the general public and our living environment. Avoid unnecessary noise and
pollution.
•
Lawn and green waste must also be disposed of in an environmentally friendly manner in
accordance with local regulations - ensure separate collection and proper disposal.
•
If the machine is finally taken out of service, it must not be disposed of in an uncontrolled
manner. Hand it over to an authorized disposal point to avoid environmental pollution and to
comply with legal requirements.
Strictly adhere to the local regulations for the disposal of environmentally harmful substances such as:
•
Packaging materials
•
Waste oil and fuel residues
•
Filters and damaged or replaced components
These materials must not be disposed of with household waste. Collect them separately and take them
to suitable collection points for recycling or proper disposal.
Manual_FX-RMT84M_FX-RMT92A_Int24_rev01
78