Storage - Fuxtec Fx-Rmt84M Manuel

27. STORAGE

•
WARNING! Always remove the ignition key before carrying out cleaning or maintenance work
and follow the safety instructions carefully. Wear suitable clothing and protective gloves to
avoid injury.
•
WARNING! Never use the machine with damaged or worn parts. These must be completely
replaced - repairs are not permitted. Only use original spare parts.
•
Non-original or improperly installed parts can jeopardize operational safety, cause accidents
and injure persons. The manufacturer accepts no liability in such cases.
•
Maintenance and adjustment work that is not expressly described in these instructions may
only be carried out by authorized specialist workshops or your specialist dealer.
•
Only there will suitable equipment and qualified personnel be available to maintain the
machine safely in accordance with the manufacturer's specifications.
•
Maintenance work carried out by unauthorized persons or workshops voids all warranty
claims and the manufacturer's liability.
•
Remove the ignition key after each use and check that it is intact.
•
Tighten all screws, nuts and bolts regularly to maintain operational safety. Regular
maintenance is crucial for safety and performance.
•
In particular, check that the screws on the cutting tools are tight.
•
Always wear suitable work gloves when handling cutting tools (e.g. when removing or
installing).
•
When sharpening the blades, ensure that they are evenly balanced.
•
Work such as dismantling, sharpening, balancing, reassembling or replacing cutting tools
requires specialist knowledge and special tools - this should only be carried out by specialist
companies.
•
Check the function of the brakes regularly and have them serviced or repaired if necessary.
•
Replace illegible or damaged warning and information signs immediately.
•
Lower the cutting device completely if the machine is not to be used for a long period of time
or is to be left unattended.
•
Always keep the machine out of the reach of children.
•
Never store the machine with a full fuel tank in places where fuel vapors could be ignited by
open flames, sparks or heat sources.
•
Allow the motor to cool down completely before parking the appliance indoors.
•
Keep the engine, silencer, battery compartment and the area around the fuel tank free of
grass, leaves, oil and dirt - this helps to prevent the risk of fire.
•
Empty the grass catcher completely after each use. Never store filled grass catcher in closed
rooms.
•
Check regularly whether oil or fuel lines are leaking. Even small leaks can lead to a fire hazard.
•
If the fuel tank needs to be emptied, only carry out this procedure outdoors when the engine
has cooled down.
•
Never leave the ignition key in the ignition lock or in the vicinity of children or unauthorized
persons. Always remove it before carrying out any maintenance work.
Check the following protective and functional parts regularly for damage or wear and replace
Manual_FX-RMT84M_FX-RMT92A_Int24_rev01
77