Maintenance And Cleaning; Environmental Protection; Service; Fax - Bosch GFZ 14-35 A Instructions D'emploi

Maintenance and Cleaning

Before any work on the machine itself, pull the
mains plug.
For safe and efficient working, always keep the ma-
chine and the ventilation slots clean.
Clean the sword and the saw blades after finishing the
work. The saw blades slide on wear-free, hard metal
guides and should not be lubricated to ensure opti-
mum dust extraction.
Replace cracked, bent or dull saw blades.
WARNING
Important instructions for connecting a new 3-
pin plug to the 2-wire cable.
The wires in the cable are coloured according to the
following code:
strain relief
live = brown
neutral = blue
Do not connect the blue or brown wire to the earth ter-
minal of the plug.
Important: If the plug on the cable of this machine
must be replaced, dispose of the old plug to prevent
misuse.
If the machine should fail despite the care taken in
manufacture and testing, repair should be carried out
by an authorised customer services agent for Bosch
power tools.
For all correspondence and spare parts orders, always
include the 10-digit order number of the machine.
Guarantee
We guarantee Bosch products in accordance with
statutory/country-specific regulations (proof of pur-
chase by invoice or delivery note).
Damage attributable to normal wear and tear, over-
load or improper handling will be excluded from the
guarantee.
In case of a claim, please send the machine, com-
pletely assembled, to your dealer or the Bosch
Service Centre for pneumatic tools or power tools.

Environmental Protection

Recycle raw materials instead of
disposing as waste.
Machine, accessories and packaging
should be sorted for environment-
friendly recycling.
These instructions are printed on recy-
cled paper manufactured without
chlorine.
The plastic components are labelled
for categorized recycling.
3 609 929 347 • (00.12) T

Service

Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
GB-Middlesex UB 9 5HJ
✆
✆

Fax . . . . . . . . . . . . . . . . . . . . . . . (0 18 95) 83 87 89

Ireland
Beaver Distribution Ltd.
Greenhills Road
IRL-Tallaght-Dublin 24
✆
Fax . . . . . . . . . . . . . . . . . . . . . . . . . . (01) 4 51 71 27
Australia
To be fitted
by qualified
Robert Bosch Australia L.t.d.
professionals only
RBAU/SBT2
1555 Centre Road
P.O. Box 66 Clayton
AUS-3168 Clayton/Victoria
✆
Fax . . . . . . . . . . . . . . . . . . . . . . . . . . 1 800 819 520
New Zealand
Robert Bosch Limited
14-16 Constellation Drive
Mairangi Bay
Auckland
New Zealand
✆
Fax . . . . . . . . . . . . . . . . . . . . . . . . .
We declare under our sole responsibility that this prod-
uct is in conformity with the following standards or
standardization documents:
EN 50 144 according to the provisions of the direc-
tives 89/336/EEC, 98/37/EC.
Robert Bosch GmbH, Geschäftsbereich Elektrowerkzeuge
Specification subject to alteration without notice
English–5
Service . . . . . . . . . . . . . . . . . . (0 18 95) 83 87 82
Advice line. . . . . . . . . . . . . . . . (0 18 95) 83 87 91
Service . . . . . . . . . . . . . . . . . . . . . (01) 4 51 52 11
. . . . . . . . . . . . . . . . . . . . . . . . . . . 1 800 804 777
. . . . . . . . . . . . . . . . . . . . . . . . . .

Declaration of conformity

Dr. Gerhard Felten
(09) 47 86 158
(09) 47 82 914
Dr. Eckerhard Strötgen