Before Use - Bosch GFZ 14-35 A Instructions D'emploi

Scie-tandem
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
Connect machines that are used outdoors by
s
means of a fault current protection switch (FI) with
a maximum triggering current of 30 mA. Use only
an extension cable that is approved for outdoor
use.
Always direct the cable to the rear away from the
s
machine.
Working with material containing asbestos is not
s
permitted.
Always switch off the machine and allow to come
s
to a stop before putting down.
Put on the saw blade protector when laying down
s
the saw.
Keep children away from the machine.
s
Never allow children to use the machine.
s
Bosch is able to ensure perfect functioning of the
s
machine only if the original accessories intended
for it are used.

Before Use

Mounting the Loop Handle
13
Slide the spacer tube 14 into the housing
ten with the knurled screw 13
2
Spread the loop handle 2 somewhat
over both ends of the spacer tube
3 609 929 347 • (00.12) T
14
A
and tigh-
B
.
C
and place
.
D
English–2
12
Insert the bolt 15
E
and tighten with the knurled nut
12
F
.
Adjusting the Loop Handle
Loosen the knurled nut 12 and adjust the loop to the
desired inclination. (Fig.
For sawing near the edge, slide the loop handle to the
side by loosening the knurled screw 13 . (Fig.
Retighten the knurled screw or nut.
For the inserting of the saw blades, see Section
Changing Saw Blades .
Dust/Chip Vacuuming
The dust/chip vacuuming prevent
large amounts of material from collect-
ing and high concentrations of dust in
the breathing air as well as facilitates
the disposal of the dust.
Dust produced while working can be
detrimental to health, inflammable or
explosive. Suitable protection meas-
ures are required.
Examples: Some dusts are considered
to be carcinogenic. Use suitable
dust/chip extraction and wear a dust
protection mask
For long periods of working with wood or for commer-
cial use on materials that produce dust that is detri-
mental to health, the machine is to be connected to a
suitable external dust extraction device (for exam-
ple, directly to the socket of a suitable Bosch general
purpose vacuum cleaner with remote starting device
that starts automatically when the machine is switched
on).
)
C
D
15
)

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Gfz 16-35 ac

Table des Matières