Klein Tools IR1KIT Manuel D'instructions page 8

ENGLISH
WIRING CONFIGURATION TESTING
Conditions indicated: wiring correct, open ground, reverse polarity, open hot, open
neutral and hot/ground reversed.
Conditions NOT indicated: quality of ground, multiple hot wires, combinations of
defects, reversal of grounded and grounding conductors.
All appliances or equipment on the circuit being tested should be unplugged to help
reduce the possibility of erroneous readings.
STANDARD RECEPTACLES
1. Verify tester operation by testing on a known live and correctly wired receptacle.
2. Plug tester into receptacle.
3. Compare the illuminated lights on the tester to the key code printed on the tester.
4. If the tester indicates that the receptacle is not wired correctly, consult a
qualified electrician.
GFCI RECEPTACLES
1. Check the GFCI receptacle user manual for information on how the specific
receptacle operates prior to using this tester.
2. Insert the tester into the receptacle under test to check for correct wiring (See
FIG. 2). Lights on the tester should illuminate.
3. Press the "TEST" button on the GFCI receptacle. Did the GFCI trip and the lights
on the tester go dark?
YES: Reset the GFCI by pressing the reset button. Proceed to step 4.
NO: The GFCI is not operating properly or the receptacle is miswired. Consult a
qualified electrician.
4. Press and hold the test button on the tester for 7 seconds. Did the GFCI trip and
the lights on the tester go dark?
YES: Reset the GFCI by pressing the reset button. The GFCI appears to be
operating properly.
NO: The GFCI is not operating properly or the receptacle is miswired. Consult a
qualified electrician.
Be sure meter is turned off and wipe with a clean, dry lint-free cloth.
Do not use abrasive cleaners or solvents.
See this product's page at www.kleintools.com for FCC compliance
information.
Do not place equipment and its accessories in the trash. Items
must be properly disposed of in accordance with local regulations.
Please see www.epa.gov/recycle for additional information.
450 Bond Street Lincolnshire, IL 60069 1-800-553-4676
customerservice@kleintools.com www.kleintools.com
OPERATING INSTRUCTIONS
CLEANING
FCC & IC COMPLIANCE
Canada ICES-003 (B) / NMB-003 (B)
WARRANTY
www.kleintools.com/warranty
DISPOSAL / RECYCLE
CUSTOMER SERVICE
KLEIN TOOLS, INC.